Reusable big bags FAQs:
Multi-use considerations and bag unloading
ガイドの内容
Reusable big bags, offer major operational and environmental advantages over single-use alternatives. Unlike single-trip bulk bags that are designed for one-time use, reusable big bags are engineered with higher safety factors and enhanced durability features that enable multiple fill-empty cycles when handled correctly. Successful implementation requires specialised knowledge of proper unloading techniques, safety protocols, and maintenance procedures.
It’s worth noting single-use liners are often used with reusable big bags. After unloading, the used liner is discarded and a new sterile liner is put in the reusable bag.
This comprehensive list of FAQs addresses the critical considerations for safe and efficient reusable bulk bag unloading, from equipment selection and dust control to regulatory compliance and sustainability practices. Whether you’re designing a new bulk bag discharging system or optimising and existing operation, we aim to answer common questions from operations teams who are unloading big bags. Other names for big bags include flexible intermediate bulk containers (FIBCs), bulk bags and bulky bags.
1. General questions about reusable big bags and bulk bag unloading
A big bag, commonly known as a flexible intermediate bulk container (FIBC) or bulk bag, is a large, flexible woven container. It is used for storing and transporting dry, flowable materials (e.g., sand, fertiliser, plastic granules). A reusable FIBC is more durable and constructed to a higher safety factor to be used multiple times.
Unloading a reusable FIBC typically means emptying its contents via a bottom discharge spout or outlet. The filled bag is either lifted by its loops, using a forklift or hoist, or it’s placed on a bulk bag unloading frame. The discharge spout at the bottom is opened to release material by gravity. The goal for reusable big bags is to recover the bag so it can be used again.
Reusable bags require inspection before and after unloading. Operators should check the bag’s lifting loops, fabric, and seams for any damage each time. According to ISO 21898 guidelines, single-trip bags with a 5:1 safety factor must not be reused. Only bags rated 6:1 or higher should be used for multiple-use unloading.
Single-use big bags are intended for one trip and one-time unloading. They have a flat bottom and need to be cut open to decant the material.
Reusable big bags are engineered for multiple cycles. They are designed with features such as a closable spout and closure system that allow controlled unloading without destroying the bag.
The number of reuse cycles for reusable big bags depend on their design and condition. The Flexible Intermediate Bulk Container Association (FIBCA) recommends each big bag is cleaned, inspected, and reconditioned before the next fill.
NOTE: Reuse of big bags is not recommended for food applications due to risks such as bacterial growth, gluten transfer, or changes in flavour.
Key steps for the safe reuse of big bags include:
- Cleaning: Remove all residual product and dust from the interior of the FIBC, ensuring no more than ~ 113 grams (4 ounces) of material remains.
- Reconditioning: Repair or replace any bag accessories, such as new tie straps or cord locks, and ensure labels are intact and legible. This is especially important for safety labels and Safe Working Load (SWL) tags.
- Inspection: Rigorously check the bag for any damage such as frayed lifting loops, tears, weakened seams, or contamination. Reject the bag if there is any damage, contamination, or moisture, or if the bag’s safety information has become unreadable. Bags showing signs of weakness or damage should not be reused for safety reasons.
- Tracking: It is good practice to track the usage history of each reusable FIBC. Some programs label bags and log how many trips they’ve made. Many companies limit the number of uses and ensure it always handles the same product to avoid cross-contamination.
Reusable FIBCs are widely used across diverse industries from food processing and pharmaceuticals to chemicals, agriculture, construction, critical minerals, and plastics. These multi-trip bulk bags handle dry bulk materials such as powders, granules, pellets, grains, seeds, flakes, beads, and even construction aggregates. In regulated sectors such as food, beverages, and pharma, bags are made of certified food-grade materials. They are often dedicated to a single product to meet strict cleanliness standards and prevent cross-contamination.
Chemical and plastic producers similarly use reusable big bags for resins or powdered chemicals, typically in closed-loop systems where each bag repeatedly carries the same material to avoid any contamination and quality issues. Across all industries, the reuse of bulk bags offers cost and sustainability benefits by reducing single-use packaging waste. This requires extra handling discipline to ensure safety and hygiene with each cycle.
Very dusty or hazardous powders may necessitate dust collection using an explosion-proof dust collector to protect workers and prevent environmental release.
Reusable big bags, or bulka bags, are usually unloaded with dedicated bulk bag discharging stations designed to interface with the bag’s closable outlet spout. These systems securely support the hanging bag and enclose its spout in a dust-tight access chamber, allowing an operator to untie the spout without exposure to product. A clamp ring or iris valve is typically used to seal around the spout and regulate flow, enabling controlled discharge and easy retying for partial emptying.
High-integrity spout seals and venting or dust extraction ensure fine powders stay contained during flow and when closing the spout. Unloaders for reusable bags also accommodate common multi-trip features like inner liners and heavy-duty loops, while avoiding damage to the bag so it can be used again. For hygiene-sensitive industries, these stations are built to sanitary standards and often include static grounding points for Type C conductive FIBCs to meet ATEX safety requirements in combustible dust environments. By adhering to ISO 21898 guidelines, multi-trip FIBCs are reused only in closed-loop controlled cycles to ensure safety and cleanliness.
Bulk bag unloaders have several design features and optional accessories to improve material discharge, especially for materials prone to hang-ups and agglomeration. Key features include:
- Bag massagers/conditioners: Devices that physically agitate the bulka bag to break up clumps and encourage flow. Many big bag unloaders have side paddles or plates that press on the bag’s sides.
- Vibratory base or shakers: Instead of, or in addition to, side paddles, a big bag unloader can be equipped with vibration to promote discharge. For example, a vibratory table or gyrator is built into the support platform. It shakes the bag or the hopper below at controlled frequencies.
- Iris valve/flow control: The iris valve aids discharge by allowing a controlled, gradual release. By throttling the discharge, it prevents sudden surges of material that could lead to clogs or dust plumes. It also enables the operator to stop flow quickly if a problem arises. This is especially useful for rapidly flowing materials that might otherwise rush out too fast.
- Spout stretchers and bag tensioners: As the bag empties, the sides tend to collapse which can trap leftover material in the folds. Bulk bag unloader designs address this by keeping tension on the bag. Some have an automatic bag stretcher which is spring-loaded or gas-shock supports raising the loop frame as the weight decreases. This stretches the bag vertically, encouraging any remaining material to funnel down. If an inner liner is being used in the big bag, a liner tensioner reels in the liner, preventing it from sagging and blocking flow.
Dust control is a major consideration in bulk bag unloading. It’s common for materials such as cement, flour, and chemicals to release airborne dust during unloading. Here are key dust-containment methods used in well-designed systems:
- Sealed spout interface: Use a dust-tight spout clamping or iris valve system to secure the bag’s outlet to prevent leaks during untie and discharge.
- Access enclosures with glove ports: Install an enclosed untie box with glove ports to shield operators and contain any initial dust release during spout opening.
- Integrated dust extraction: Connect the unloader to a dust collector or vacuum system that continuously draws air from the spout area, capturing dust at the source.
- Controlled material flow: Use an iris valve to start flow gradually, allowing dust to settle or be extracted before full discharge begins.
These measures result in a cleaner environment, protect worker safety, and help meet hygiene or compliance standards.
Many FIBCs, especially those used for fine powders, moisture-sensitive products, or food and pharma materials, have a thin polyethylene inner liner inside the outer woven bag. Unloading these lined bulk bags requires a few extra considerations.
- Liner and spout management: Secure the liner’s spout before starting. Clamp the liner together with the outer spout in the unloader’s spout clamp or iris valve. This ensures the liner doesn’t slip apart from the big bag. Some unloading stations have a specialised liner clamping ring in addition to the outer spout clamp, to hold the liner firmly and create a tight seal. If not secured, the liner could slide out or even be sucked into downstream equipment once material begins to flow.
- Preventing blockage: The liner can bunch up or droop into the outlet as the bag empties. This can choke off the flow or even get pinched in rotary valves or feeders below. By keeping tension on the liner, either manually, by tying it off to the frame, or via an automatic tensioner, operators ensure the liner stays taut. Once the outer spout is untied, the liner can be cut or pierced in a controlled way to open it while it’s clamped. This allows the material to flow while the top of the liner remains secured.
- Antistatic considerations: If the environment is combustible or the product is flammable, liners also need to be antistatic. Standard polyethylene liners can generate static. There are special liners available (e.g., for Type D antistatic FIBCs) that dissipate charge. Ensure any static on the liner is bled off by ensuring it contacts the grounded spout clamp. This is important because a floating plastic liner could create sparks in an ATEX zone. Some liner clamps are designed to puncture the liner slightly or use conductive spikes to maintain electrical contact for grounding.
- Maintaining food-grade conditions: In food or pharmaceutical use, liners are critical for maintaining cleanliness. The unloading equipment should allow the liner interior to remain sanitary. When cutting or opening the liner, tools should be clean, and there should be no shedding of plastic into the product. The operator might wear clean gloves and use a dedicated knife when cutting a liner to avoid contaminating the product.
- Disposal of liners: Once the bag is empty, the liner should be removed and disposed of or recycled appropriately. Some companies have a liner removal station or the operator manually pulls it out. Care must be taken as residual powder can puff out during liner removal. Liner removal is done slowly with the dust collector still running, or the liner is tied off before pulling it out.
Unloading bulk bags presents several serious safety hazards if proper procedures are not followed and/or correct equipment is not used. The main risks include:
- Crush injuries from falling or dropping loads: The most severe hazard is a full bag, which can weigh 1,000 kg (2205 lbs), falling onto operators. This can happen if a bag is not properly supported or if someone stands under a suspended bag and a failure occurs.
Use proper lifting techniques and equipment. Only lift bulk bags by the designated lift loops. Check that the lifting mechanism, such as a hoist, crane, or forklift, is rated for the load and in good condition. Lift the bag smoothly without jerking because sudden movements can swing the bag or put shock loads on the loops.
- Bag rupture or failure: If an overused or damaged bag is being reused, it could tear or rupture during lifting or unloading. A sudden rupture will dump material unexpectedly. Inspection of reusable bags is vital. Adhering to SWL limits is non-negotiable.
- Pinch and crush points in equipment: Bulk bag frames with mechanical flow aids such as hydraulic paddles or clamps introduce pinch/crush hazards for hands and fingers. If an operator reaches into the wrong spot while a bag massage plate is working, it could cause injury. Even moving parts like hoist hooks, trolleys, or the edges of an iris valve can cause an injury. Designs should incorporate shields and interlocks, and operators should keep clear of moving parts during operation.
- Dust exposure and explosion risk: Many materials handled in FIBCs are powders that can be harmful if inhaled or if they contact skin/eyes. Without dust containment, unloading can release clouds of dust that pose respiratory hazards or even toxicity or allergen risks. If the product is combustible, an airborne dust cloud can explode if given an ignition source.
- Static electricity and shock or fire hazard: As material flows out of a plastic bag, it can create a static charge. If the FIBC is not the correct type or not grounded, this static can discharge as a spark. In a dusty or flammable environment, it can cause a fire or explosion.
- Product spillage: A burst bag or a hopper overflow could release a large quantity of material into the environment. If the material is hazardous, such as toxic or corrosive materials, this can endanger workers and contaminate the facility or environment. Even non-toxic spills can cause slip hazards, attract pests, or create combustible dust accumulations if not cleaned promptly. Always attach the spout to the bulk bag discharger clamp or close the iris valve before undoing the tie. This prevents material from rushing out uncontrollably even if the tie is released or cut.
- Training and procedures: Only trained personnel should handle FIBC unloading. Training should cover how to rig a bag, how to operate the unloading station controls, hazard awareness, and emergency procedures. Have a clear standard operating procedure (SOP) in place.
ATEX (derived from the French “ATmosphères EXplosibles”) refers to the European Union (EU) directives and regulations for controlling explosive atmosphere risks. Since FIBC unloading can generate dust, ATEX requirements are highly pertinent in EU and many other regions following similar standards, like the international IECEx (International Electrotechnical Commission System for Certification to Standards Relating to Equipment for Use in Explosive Atmospheres).
Managing explosion risks during FIBC unloading, especially in ATEX-classified zones, requires a combination of compliant equipment selection, static control measures, procedural safeguards, and thorough documentation.
- Use ATEX-compliant equipment
Electrical and mechanical components such as motors, sensors, solenoid valves, and control panels must be certified for use in explosive atmospheres. They should be dust-tight, purged, or designed to remain below ignition temperatures. Bulk bag unloaders in Zone 21 or 22 must be marked accordingly and include a Declaration of Conformity. - Select the correct FIBC type for the hazard zone
FIBCs are classified by electrostatic type (A, B, C, D). In explosive atmospheres, only Type C (grounded) or Type D (antistatic) bags should be used. Type C bags must be grounded during both filling and emptying. - Bond and ground equipment and personnel
All conductive parts of the unloader, support frame, hopper, and conveying equipment must be electrically bonded and grounded to dissipate static build-up. Operators should wear antistatic PPE, such as footwear, and avoid clothing that can generate static. - Implement ignition source controls
Open flames, smoking, hot work, and unapproved tools must be strictly prohibited. Only use safe or ATEX-rated components to prevent electrical sparks. Even mechanical friction sources should be minimised. - Control dust and provide explosion protection systems
Uncontained dust clouds increase explosion risk. Dust containment, local extraction, and explosion venting or isolation valves are essential, particularly if material is conveyed downstream. - Maintain environmental controls
Humidity control can reduce static accumulation. Design features like reduced free-fall distances and use of chutes or socks also limit static build-up. - Apply procedural safeguards
ATEX regulations require documented risk assessments, operator training, and controlled maintenance procedures, for example, permit-to-work systems for hot work. Tools and methods used in Zones 21 and 22 must be certified non-sparking. - Ensure regular inspection and documentation
Equipment must be maintained within its ATEX-certified condition. Static control components like ground straps, antistatic brushes, and bag features must be regularly inspected. Facilities must maintain an Explosion Protection Document (EPD) and ensure compliance through ongoing training and auditing.
ISO 21898 is the main international standard for bulk bags’ safety factors and performance. It works in tandem with guidelines from FIBCA/EFIBCA which detail safe usage. For special applications, other standards (UN, food safety, etc.) come into play. When selecting FIBCs or designing operations, referencing these standards ensures a high level of safety and compliance with global best practices. Suppliers should provide documentation that bags meet ISO standards and any other relevant certifications. This gives assurance to integrators and users that the FIBCs will perform as expected under the rigours of loading and unloading.
There are several international standards and guidelines governing FIBCs, covering everything from design and testing of the bags themselves to safe handling practices:
- ISO 21898 – Packaging – Flexible Intermediate Bulk Containers for non-dangerous goods: This is a key ISO standard specifically for FIBCs. It sets out the requirements for materials, construction, design, and testing of bulk bags used to transport non-hazardous goods.
- UN certified: If an FIBC is used to transport hazardous materials, there is a special class called “UN FIBCs” that are certified for dangerous goods. These are labelled with codes like 13H3 or 13H4, indicating they meet UN performance tests.
- FIBCA and EFIBCA guidelines: The FIBCA and its European counterpart EFIBCA publish detailed handling guidelines. While not formal standards, they do provide industry benchmarks for safe use. They cover proper filling, lifting, transportation, and emptying procedures. These guidelines are globally referenced.
- ISO 21806 manufacturing practices and quality standards: While ISO 21898 is the main FIBC performance standard, there are also standards for specific aspects like UV resistance. Additionally, quality management standards like ISO 9001 are often applied by bag manufacturers to ensure consistent product quality. Some countries or regions may have their own standards. For example, India’s IS 10910 for polypropylene safe for food contact, or Chinese standards for export packaging. If shipping internationally, it’s wise to check if any destination country requires compliance with one of their standards or certifications.
- Standards for equipment: The unloading equipment itself might not have a dedicated ISO standard, but various ISO/EN standards apply to parts of it. For example, EN 14491 (dust explosion venting) might be relevant, or ISO standards for machinery safety like ISO 12100 (risk assessment) could be indirectly applicable. However, in procurement, look for CE marking (in Europe) or other certifications on the unloader which show it meets essential health and safety requirements for machinery. Many reputable manufacturers will design to meet ISO 45001 (safety management) or similar, ensuring the equipment is safe to use.
- Food safety standards for food-grade FIBCs: Internationally, if FIBCs are used for food, standards such as ISO 22000/FSSC 22000 (food safety management systems) or the BRCGS Global Standard Packaging Materials are relevant. These ensure the bags and handling are done hygienically. For example, the BRCGS Packaging Materials standard is recognised globally. Many FIBC manufacturing plants get certified to prove they produce food-grade bags. This goes beyond the bag and covers factory cleanliness, metal detection, etc. while making the big bags.
Food-grade unloading of reusable FIBCs requires strict adherence to hygienic design and regulatory compliance. Equipment in contact with the product must be constructed from food-safe materials, typically 304 or 316 stainless steel with crevice-free surfaces to prevent residue build-up. Gaskets, seals, and connectors should be FDA- or EU-compliant. The system should support CIP (clean-in-place) or SIP (steam-in-place) protocols and comply with global food standards, including FDA 21 CFR, EC 1935/2004, GMP, and HACCP. In specific applications like dairy, compliance with 3-A Sanitary Standards may also be necessary. Dust-tight design and optional extraction systems help prevent contamination during discharge.
Reusable food-grade FIBCs must be appropriately cleaned, inspected, and reconditioned between uses. Key maintenance practices include:
- Cleaning: Remove product residues with air jets or vacuums. Sterilisation may be used if required.
- Liner replacement: Inner liners are usually single-use and must be replaced with compliant liners for each cycle.
- Inspection: Check for damage to lift loops, seams, and fabric. Discard compromised bags.
- Reconditioning: Minor repairs are permitted if they restore bag function and traceability.
- Storage: Bags must be completely dry and stored away from UV light, moisture, and contamination.
- Tracking use: Maintain a log or tag system to monitor each bag’s reuse cycles.
- Certification: When third-party reconditioning is used, ensure bags retain the necessary safety factor and performance.
Cleaning procedures for a bulk bag unloading system are important for product purity and safety. The specifics of cleaning depend on whether the application is industrial or for a food/pharma environment. General practices include:
- Lubrication and servicing: Follow the manufacturer’s guidelines for lubrication. Many unloaders have bearings or moving joints such as hinge points on bag paddles, trolley wheels, and hoist gears that need periodic greasing. Overhead hoists often require an annual service to check the gearbox oil, test the lifting brake, etc.
- Calibration (if applicable): If the unloading station incorporates a scale (i.e., load cells under the hopper to measure weight), those should be calibrated regularly to ensure accurate weighing, especially if dosing or inventory is important.
- Cleaning accessible surfaces: Wipe or brush down all accessible interior surfaces that come into contact with products. Wet cleaning with a food-safe detergent followed by a rinse and sanitising step is often recommended for food-grade systems. For example, the spout access box, hopper walls, and discharge chute might be hand-wiped with cleaning solution. In industrial systems, a dry wipe or brushing may suffice if materials are compatible.
- Disassembly for cleaning: Many unloaders allow parts to be disassembled without tools. Partially disassemble the equipment if cross-contamination is a concern. Quick-connect fittings can facilitate this. Keep a set of clean spare parts on hand, if needed.
- Cleaning frequency: In a continuous operation handling the same material, a thorough cleaning might be scheduled periodically to avoid excessive build-up or spoilage. In food, however, if the material is prone to microbial growth, cleaning and sanitisation might be needed after each lot.
- Preventing cross-contamination: If the same unloader is used for different materials (especially in food/pharma), a validated cleaning procedure should be in place. This could involve test swabs or samples after cleaning to ensure no residue of the previous product or batch remains. Sometimes an intermediate flush with a neutral material is used, but physical cleaning is more reliable.
- Documentation: Maintain a log of maintenance activities. Using a checklist for daily checks and a schedule for monthly/quarterly detailed inspections helps ensure nothing is missed and all safety standards are met. Annual third-party inspection of lifting equipment is also a common requirement.
A lack of flow from a big bag is a common issue during discharging, often due to the characteristics of the material or the way it’s being handled. Flow problems can be caused by bridging, ratholing, compaction and settling, or static cling. It can also be due to a product’s low bulk density.
Suggestions for improving material flow:
- Break up clumps before or during discharge: When using material prone to clumping, conditioning the bag before unloading improves throughput speeds. Standalone bulk bag conditioners squeeze the bag in multiple spots to crush hard lumps prior to unloading.
- Use flow aids: Bag massagers or paddles can be applied to break up material when flow slows or stops. Using vibration is another way to correct flow issues. Continuous or intermittent vibration can collapse bridges and keep materials moving.
- Ensure proper bag installation: Flow issues can occur when the bag isn’t placed on the station properly. If the spout is not untied properly material flow can also be restricted.
- Ventilation or air inlet: A vacuum or stagnant air pockets can form inside the bag if there’s no air flowing to replace the material leaving the big bag. The top of the bag can be opened to allow air to enter to improve air flow. In some cases, especially with very fine powders and sealed bags, a venting mechanism can improve the overall process.
Dust leakage and product spillage during reusable big bag unloading can be effectively managed through a combination of properly sealed equipment interfaces, dust extraction systems, and operator best practices. Key to containment is the use of a sealed discharge spout with a clamping mechanism that connects securely to the bag outlet, preventing material from escaping during flow. A telescoping or enclosed interface can also help maintain a controlled environment.
In addition to physical containment, integrating a dust extraction or filtration system, such as a local HEPA filter or central dust collector, helps capture airborne particles during bag emptying and detachment. These systems are particularly important for fine powders or allergenic materials posing health and contamination risks.
Operational measures also reduce the likelihood of leakage and product loss. These include activities like:
- pre-conditioning compacted materials
- training staff on safe bag handling
- operational adjustments to discharge rates
- ensuring bags are not overfilled.
If a reusable bulk bag’s discharge spout or valve won’t open, ensure all safety protocols are followed before inspecting the issue. The spout may be tangled, heat-sealed, or clamped inside the bag from transport or handling. Gently untie the spout in a controlled manner using designated tools, and confirm the bag is properly aligned within the discharger frame for smooth material flow.
If the bag has a liner, a common cause of blocked flow is the liner plugging the outlet. The liner can get sucked down by the outflowing material and clog the spout like a diaphragm. If this is to be the likely issue, the liner may need to reset or cut. Close the valve, open the access door, and either pull the liner up and secure it, or if it’s protruding, carefully cut the excess liner that’s stretching into the outlet, then close and try again. To prevent recurrence, ensure a liner tensioner or clamps are in use.
To prevent recurring issues, review the bag filling and storage process, ensure vented bags are properly degassed, and verify that materials are compatible with gravity discharge. For frequent flow stoppages, consider retrofitting the unloading station with flow assistance devices or switching to a forced-discharge solution such as a screw feeder or pneumatic transfer system.
An alternative method for offloading material is suggested for times when flow cannot be restored quickly. An example would be to move the bag to a secure area and cut it open from the top to salvage the product into drums. It’s better to lose one bag than increase downtime in the process. Destroying the big bag is a last resort if it is not dischargeable by normal means.
Reusable FIBCs offer a significant sustainability advantage by reducing packaging waste and promoting resource efficiency. Reusable models are designed for multiple fill–empty cycles, often lasting through 5 to 10 uses, or more, depending on product type, handling conditions, and reconditioning practices. This reduces the volume of packaging sent to landfill and lowers demand for virgin plastic materials used in bag manufacturing.
By integrating reusable big bags into a closed-loop handling system, companies can minimise environmental impact across their supply chain. This involves cleaning, inspecting, and requalifying bags for continued use, ensuring safe performance while extending bag life. Reusable bags also reduce the frequency of procurement and transport of packaging materials, cutting associated emissions and operational costs.
Sustainability benefits also come from operational efficiencies. Reusable bags typically feature higher strength ratings and are compatible with dust-tight unloading systems, which help reduce product loss, contamination, and emissions during transfer. When paired with automated unloading equipment, they contribute to cleaner, safer, and more efficient material handling environments.
At end of life, many reusable FIBCs, especially those made from polypropylene, can be recycled if they are clean and free from contamination. Some operations partner with specialist recyclers or reconditioning services to maximise recovery. This allows businesses using reusable FIBCs to contribute to circular economy goals by reducing waste, supporting resource reuse, and lowering the overall carbon footprint of bulk material handling.
At the end of their usable life, reusable FIBCs should be assessed for contamination. Bags used for hazardous or regulated materials must be disposed of through approved waste management channels in line with local regulations. Clean, uncontaminated bags can often be recycled, as most are made from recyclable woven polypropylene.
Before recycling, remove any liners or non-compatible components. If recycling isn’t available, bags should be disposed of responsibly via landfill or energy recovery methods. To support sustainability and compliance, operators should track bag usage, inspect bags regularly, and implement a clear disposal or recycling protocol.
Summary
Implementing best practices for reusable big bag unloading delivers measurable benefits across plant operations. By focusing on proper equipment selection, dust control, safe handling, and static mitigation, plants enhance worker safety, maintain product quality, and reduce contamination risks. Incorporating reusable big bags into a well-managed unloading system also contributes to sustainability goals by minimising packaging waste and supporting circular material use.
Floveyorと連絡を取る
Gain efficiency with Floveyor bulk bag unloading solutions. Optimise your bulk material handling, improve operator safety, and reduce downtime. Contact us for more information, or get a quote.
